Repair Tech
[tablet repair] Apple Pencil charging issues after board work?
I've been facing some frustrating issues with Apple Pencil charging after performing board work on some iPads. After replacing a few components on the logic board, customers have reported that their Apple Pencil won't charge or connect properly. I followed the usual procedures and double-checked all connections, but the problem persists. Has anyone else run into this issue? Any tips on how to troubleshoot or fix this? I'm looking for specific parts or techniques that might help me resolve this reliably.
2 Answers
Hi! I had a similar issue a while back, and it turned out to be related to the charging port on the iPad itself. Sometimes after board work, the connections can be slightly misaligned or damaged. I recommend checking the charging port for any debris or damage and ensuring the connections are solid. You might also want to try a different charging cable to rule that out. If all else fails, I found that sourcing a replacement charging port from a reliable vendor like iFixit or RepairParts can help fix the issue. Also, be sure to run diagnostics with software like 3uTools to identify any underlying issues that might not be immediately visible. Good luck!
I've dealt with this as well, and I think it's important to revisit the board work you did. Make sure that any soldering is clean and that no pads were lifted. I've used a microscope to inspect the board closely after any major repair. If you find any small cracks or issues, you might need to reflow the solder on certain components. As for parts, I usually buy my components from places like eBay or AliExpress for better pricing, but make sure they have good reviews. It can be a hassle, but double-checking everything is key!